Rielli Smarty simple, affordable, effective and innovative Ultrafiltration Ideal solution for low-budgeted applications.
With Smarty, it is possible to implement projects where the conventional UF technique was deemed to be expensive

• Ideal for recovery of filter backwash waters and grey water treatment projects.
• It does not require automation panel and control equipment.
• Filtering, flush, backwash and etc. are carried out with the automation valve
• Easy to program.
• All cycles and periods can be programmed by the operator.
• No need for backwash pump.
• High performance in low pressures compared to counterparts.
• Best-in-class precise filtering range with 0.01 microns of pore size.
• Ideal for low-budget applications.
• Can be used in flow rates up to 4m3/h. Parallel connection is possible for greater flow rates.

Operating under positive pressure, Rielli ultrafiltration plants are used for treatment of particles including sediments,turbidity and SS (suspended solids) down to 0.01 micron-level (Best-in-class precise filtering range). This feature retains microorganisms and viruses so that Rielli ultrafiltration systems are widely used for pre-reverse osmosis process and post waste water treatment.

Operating under positive pressure, Rielli ultrafiltration plants are used for treatment of particles including sediments, turbidity and SS (suspended solids) down to 0.01 micron-level (Best-in-class precise filtering range). This feature retains microorganisms and viruses so that Rielli ultrafiltration systems are widely used for pre-reverse osmosis process and post waste water treatment.

Different from the pressurized plants, Rielli submerged ultrafiltration plants operate as they are submerged in the water to be treated. The permeate water produced by suction just as it is in the MBR process.
Unlike the MBR plants in this process a biologic reaction doesn't take place. High turbidity raw water is filtered through the membranes by a vacuum of only 0,1 – 0,2 bars. Therefore the system's power requirement is very low. As the membranes operate outside-in and remain in the pool uncovered, the system operates without needing any pre-filtering even in high turbidity and SS levels.

Ultrafiltration Technology is accepted as the most effective solution for rain water recovery.